| Computer
Control Side |
On-Line, Real time Control available
|
| Consisting of Priority interrupt method
by RS-232C |
| Step/ sequential control by Control
program |
| Rotation including reverse available by
Control Program |
| Output Pulse Frequency Control
available by Control Program |
| Available to experiment the character
of Angle and vibration through Simulation Software |
Manual
Control Side
|
Available to insert Manual Set-up
value directly |
| Available for step/continuous driving
by manual setup value |
| Available for controlling rotation/reverse
direction by manual setup value |
| Available for output pulse frequency control by
Manual setup value |
| Available to control speed by Manual setup
value |
| Available to control step/ sequential drive by
Joy-stick |
| Available to control the speed by Frequency
modulation at manual |
Stamping
Motor : 2ea
|
2-phase HB type,
rotation speed : 0~2000PPS |
| Unipola driving type,
unit rotation angle: |
| Use PWM static current
driving drive . |
| LM GUIDE driving and
round board driving (for angle measuring) |
| LM
GUIDE(1set) |
Type: plane type |
| Ball screw moving
distance: over 200㎜ |
| Position-key |
| Installing safety
equipment in being over Driving range |
| Angle Inspection
Equip.(1set) |
| ROTARY
ENCODER |
Over 400/ Rev |
| LED equip for Output signal and
Communication |
| Position detection photo sensor |
| Including LCD display equipment (indicating
rotation angle and moving
distance) |
